HIRO A4 vertical platform lift

A4 lifts are offered as complete solution and supplied in a robust structure . The Structure is made of aluminum sections clad with sandwich panels made of steel or safety glass. For the equivalent passenger space, the shaft can be kept smaller than that of conventional lifts, however. Due to its small dimensions, more floor space is available in the house.

Ideal for installation in existing buildings

The A4 lift can be integrated into existing buildings without considerable expenditure. To enable level access to the lift, a pit depth of only 50 mm is required, the shaft head is also reduced making installation possible into normal private homes with standard ceiling heights. If a pit has to be avoided, access can be provided via an aluminum ramp as an alternative. The complete system can, also be installed in a masonry shaft.

Advantages of the tried-and-tested drive concept

With the screw drive motor, the A4 lift puts its trust in a reliable, durable and low-maintenance drive system. The frequency converter, supplied as standard, ensures a gently gliding ride as well as smooth starts and stops with no jolting. Since the drive is installed beneath a narrow panel in the passenger space, the customary separate machine room otherwise required becomes superfluous. In comparison to conventional hydraulic lifts, lower energy costs are incurred.

Safety first

In the event of a mains power failure it is possible to safely evacuate the occupants by using the lowering device to lower the lifting platform to the next available landing level. The battery lowering control is conveniently located on the outside of the lower door a similar device can also be installed within the cabin. It is also possible to add a comprehensive range of custom options to meet your specific requirements such as a telephone or a folding seat for additional comfort.

Request a brochure

Data and facts:

Type:

type approved HIRO A4 vertical platform lift without machine room

Areas of application:

transport of disabled persons (wheelchair users) plus an accompanying person, if required - fur use inside and outside buildings

Load capacity:

300 kg, 400 kg, 1000 kg

vertical rise:

max. 13 m

Speed:

0.15 m/sec

Number of stops:

2-6

Drive:

Screw drive motor with nut and second lock-nut, power consumption 2.2 kW

Operating controls:

via control panels in the passenger space and at the landings

Power supply:

230 V, normal 16 Amp 50 Hz fused spur

Platform:

Width from 81 cm to 140.5 cm,
Depth from 83 to 248 cm,
Whithin these band width several standard measurements;
skid-resistant floor covering

shaft cladding:

foamed sandwich steel panels, painted white, for added insulation and sound reduction, or toughened safety glass panels

headroom:

not necessary, suitable for normal domestic dwellings

pit depth:

No pit is required as an aluminum ramp can be supplied to achieve level access or a pit of 50 mm (200 mm in special cases) can be created to achieve level access

ramp dimensions:

for models with no pit; aluminum, dimensions according to platform size

doors:

Swing doors as landing doors

Emergency call system:

An emergency call button is located on the control panel.

emergency lowering device:

emergency lowering device installed at the lower door; handwheel, optional powered by rechargeable battery

Further options:

A comprehensive range of additional factory fitted options are available upon request such as automatic doors and custom colours to name but a few.

Quality monitoring:

EC type examination in accordance with the machinery directive 2006/42/EC, TÜV