HIRO 500 machine-room-less passenger lift

The HIRO 500 is notable for its narrow shaft. It is versatile in its application due to the counterweights fixed on both sides of the shaft, the central car suspension and the installation of the drive on the car. In addition to rectangular lifts, this series of models also allows the possibility of fully glazed, circular lifts, produced as a special custom-made product. Even lifts on an inclined plane are possible with the HIRO 500.

Request a brochure


Data and facts

Type:

passenger lift without machine room

shaft width:

at least 1.5 m with 900 mm doors

shaft depth:

450 kg: at least 1.42 m
630 kg: at least 1.70 m
1,000 kg: at least 2.42 m

pit depth:

at least 1.1 m
(0.3 m with a speed of 0.2 m/s)

Further dimensions:

on request

Speed:

0.2 m/s - 1.6 m/s

Load capacity:

450 kg/6 persons
630 kg/8 persons
1000kg/13 persons

vertical rise:

as high as required

Number of stops:

as many as required

Drive:

patented traction drive on the roof of the car, guided centrally via two rails located on the right and the left of the car

Operating controls:

via control panels in the car and at the landings - individual designs possible

doors:

automatic landing doors and car doors; secured via photocell barrier

Electrical Power Requirement:

16 amp 3-phase plus neutral 380/400 volt 50/60 Hz 13 amp 1-phase fused spur 50/60 Hz power consumption 3-6 kW

Design/colours/ materials:

individual design of the lift shaft and the car possible

Special feature:

circular model and glazed outer car walls and shaft walls as panorama lift possible

Quality monitoring:

EC type approved in accordance with the EC directive for lifts: 95/16/EC,
technical regulations in accordance with EN 81/1,
TÜV (German inspection authority)

HIRO 500 passenger lift: even lifts on an inclined plane are possible
HIRO 500 passenger lift in a hotel
HIRO 500 passenger lift with patented friction drive, outdoor installation