HIRO 700 machine-room-less passenger lift

The feasibility of installing a lift is often thwarted by the depth required of the pit. With the HIRO 700, an exceptionally shallow pits measuring as little as 30 cm is all that is required. Due to the unique patented counter weight drive system a simple single roller is mounted in the shaft head to enable smooth efficient 1:1 suspension of the lift car. Rope wear and electrical power consumption are both appreciably reduced.

Request a brochure

 
Data and facts

Type:

machine-room-less passenger lift

shaft width:

at least 1.4 m, depending on the load capacity

shaft depth:

at least 1.4 m, depending on the load capacity

pit depth:

at least 0.3 m

Further dimensions:

on request

Speed:

0.2 m/s - 1.6 m/s

Load capacity:

300 kg / 4 persons
375 kg / 5 persons
450 kg / 6 persons
630 kg / 8 persons
1000 kg / 13 persons

vertical rise:

on request

Number of stops:

on request

Drive:

patented traction drive in the counterweight,
centrally guided car via two guide rails located on the right-hand and left-hand side of the car or guide rails on one side only (cantilevered support) are possible.

Operating controls:

via control panels in the car and at the landings - single button collective control with self-holding - individual designs possible

doors:

automatic landing doors and car doors; secured via photocell barrier

Electrical power requirements:

16-32 amp 380-400v 3-phase 50-60 Hz
13 amp 200-230v fused spur 50-60 Hz
power consumption 3-8 kW

Design/colours/materials:

individual design of the shaft frame and the car possible

Special feature:

circular model and glazed outside walls of car and shaft possible as panorama lift

Quality monitoring:

EC type approved in accordance with the EC directive for lifts: 95/16/EC,
technical regulations in accordance with EN 81/1,
TÜV (German inspection authority)

HIRO 750 passenger lift in the OPEL building, Berlin
HIRO 700 city lift, outdoor installation with aluminum shaft frame
Retrofitting existing buildings - providing access to an existing building with a HIRO 750 passenger lift